Chapter 5. Configuration Menu
DS-1 (0.2) Menu Items
5-28
Trap in DBU:
If traps are enabled (see U
parameter will send either a single trap upon going
into a DBU session or send repeated traps for the
duration of the DBU session.
Choices: S
INGLE
Format
Format sets the frame format for the base DS-1 interface.
Choices: D4, ESF
Code
C
sets the line code for the base DS-1 interface.
ODE
Choices: AMI, B8ZS
Yellow Alarm
enables and disables the transmitting of
Y
A
ELLOW
LARM
yellow alarms.
Choices: E
, D
NABLE
Line Length (ft)
L
L
provides selection of the proper output
INE
ENGTH
level for the base DS-1 based on the length of the inter-
face cable.
Choices:
S
HORT HAUL INTERFACES
533, 533-655
L
-
ONG
HAUL INTERFACES
Inband Loopback
(INBAND LPBACK)
I
-
L
N
BAND
OOPBACK
in-band loopup or loopdown codes (per ANSI T1.403
specification) which may be sent to the card over the
DS-1 interface. This loopback is a line loopback.
Choices: A
, R
CCEPT
TDU 120e User Manual
C
NIT
ONFIGURATION
, R
EPEATED
ISABLE
(ft) - 1-133, 133-266, 266-399, 399-
- 0dB -7dB, -15dB, -22dB, auto
sets the base DS-1 to accept or reject
EJECT
), this
61202156L2-1