Table of Contents
Advertisement
Chapter 5. Configuration Menu
Map Exchange
5-16
SLIP Flow Control
This is used to activate flow control on the Chain-In port
when used as the SLIP interface. Hardware mode uses
RTS and CTS.
Choices: N
, H
ONE
ARDWARE
Proxy Traps
This determines whether or not traps are forwarded to
the IP Interface from units being "proxied" for.
Choices: E
, D
NABLE
External Alarm
Sets unit to accept or reject external alarms attached to
Pin 6 or Pin 7 of the Chain-In Port. A connection to
ground indicates an alarm condition.
Choices: E
, D
NABLE
Exit
This selection will exit to the main configuration menu.
The M
E
AP
XCHANGE
time of day map switch. The unit provides selection of
the hour, minute, and seconds for the map switching to
take place. The menu items are:
OFF
Indicates the map in use does not change. The automatic
map change feature is disabled.
AUTO
Indicates that the map in use will change at a user-
selected time of day. The automatic map change feature
is enabled.
When A
is selected, the unit displays the screens to
UTO
set times for switching.
TDU 120e User Manual
ISABLE
ISABLE
menu enables and sets the automatic
61202156L2-1
Advertisement
Table of Contents
