ADTRAN TDU 120e User Manual page 4

FCC regulations require that the following information be provided to the cus-
tomer in this manual.
1. This equipment complies with Part 68 of the FCC rules. The required label is
attached to the bottom of the chassis.
2. An FCC compliant telephone cord and modular plug is provided with this
equipment. This equipment is designed to be connected to the telephone net-
work or premises wiring using a compatible modular jack which is Part 68
compliant. See installation instructions for details.
3. If your TDU 120e causes harm to the telephone network, the Telephone Com-
pany may discontinue your service temporarily. If possible, they will notify
you in advance. If advance notice is not practical, you will be notified as soon
as possible. You will be advised of your right to file a complaint with the FCC.
4. Your telephone company may make changes in its facilities, equipment, oper-
ations, or procedures that could affect the proper operation of your equip-
ment. If they do, you will be given advance notice so as to give you an
opportunity to maintain uninterrupted service.
5. If you experience trouble with the equipment TDU 120e, please contact ADT-
RAN at (256) 963-8000 for repair/warranty information. The telephone com-
pany may ask you to disconnect this equipment from the network until the
problem has been corrected, or until you are sure the equipment is not mal-
functioning.
6. This unit contains no user serviceable parts.
7. The following information may be required when applying to your local tele-
phone company for leased line facilities.
Service Type
1.544 Mbps -SF
1.544 Mbps - SF and B8ZS
1.544 Mbps - ESF
1.544 Mbps - ESF and B8ZS
8. The FCC recommends that the AC outlet to which equipment requiring AC
power is to be installed is provided with an AC surge arrester.
iv
REN/SOC FIC
6.0N 04DU9-BN
6.0N 04DU9-DN
6.0N 04DU9-1KN
6.0N 04DU9-1SN
USOC
RJ-48C
RJ-48C
RJ-48C
RJ-48C