Unit Access Table; Figure 8-1. Unit Access Table - ADTRAN TDU 120e User Manual

Chapter 8. Remote/Management Menus

UNIT ACCESS TABLE

It is not necessary to have an entry in this table for a remote unit in order
to Telnet to it or forward SNMP traps from it. In the Telnet case, the
Remote Menu Access menu is selected from the Main menu and a unit
ID is entered which may or may not be in the Unit Access Table.
____________________________Unit Access Table________________________
Unit ID
20
3
6
8
1) Add New Unit
2) Modify Unit
3) Delete Unit
4) Default Unit Passcode
5) OK
8-2
This menu edits/creates the Unit Access Table and stores
the Unit ID, Passcode, and Unit Type for units connected
via chain ports or connected remotely to the TSU/TDU
(see Figure 8-1).
An entry in the table is required only to support proxy
SNMP MIB access or polling. For MIB access, an entry is
required only if the unit's passcode is not the same as the
D U P
EFAULT NIT ASSCODE
Standalone.
Units accessed via T-Watch PRO over TCP/IP use the
unit ID and passcode set by T-Watch PRO running on the
PC.
Passcode
DEFAULT
0033
0095
0022
0022
TDU 120e User Manual
, or the unit is a single port TSU
Type Polled
Standard No
Standard Yes
TSU Standalone No
Standard Yes

Figure 8-1. Unit Access Table

Poll Status
UP
UP
61202156L2-1A