Alarm Mode (Alarm Display) - Bosch LTC-1311-20 Operator's Manual

Bosch Video Management System
11.3

Alarm Mode (Alarm Display)

Main window >
The Alarm Image window displays live or instant playback video from a camera to be displayed
in case of an alarm. It always has a 4:3 ratio. The Alarm Image window is displayed
automatically if the incoming alarm has a higher priority than the Live or Playback Image
window. The priorities are configured in the Configuration Client.
Allows you to view the alarm cameras. Alarm cameras are configured in the Configuration
Client.
If an incoming alarm has a lower priority than the currently displayed Image window, the
When more alarms are displayed than Alarm Image rows are available, the display in the last
row is sequenced. You can control the alarm sequence with the playback controls in the Alarm
Image window toolbar. You cannot perform instant playback in the last row.
NOTICE!
A map displayed in an Alarm Image pane is optimized for display and contains only the initial
view of the basic .dwf file.
Bosch Sicherheitssysteme GmbH
or >
tab starts blinking and indicates an alarm.
Operator's Manual
tab > Select an alarm >
Reference information | en
Operator Client | V3 | 2010.07
45