Bosch LTC-1311-20 Operator's Manual page 57

Bosch Video Management System
If you are authorized to display recorded videos, you can also listen to the accompanying
audio recording.
Allows you to navigate through recorded videos. The playback of all displayed Image panes is
synchronized.
Many features enable the precise finding of scenes you are searching for.
The Timeline for NVR recordings in Operator Client and Bosch VMS Archive Player displays the
following information indicated by a color or hatching:
NVR recording
Continuous recording
Alarm recording
Pre-alarm recording
Motion recording
Pre-event recording
Results of motion search
No video signal
No recording
Protected data
Audio data available
/
Bosch Sicherheitssysteme GmbH
Color
Dark gray-blue
Red
Light red
Yellow
Light yellow
White
Black
Light gray
Diagonal stripes
Thin green line above the Timeline
Click to zoom in or zoom out the Timeline.
Move the slider to adjust the playback speed for the selected cameras.
Section 8.5 Changing the playback speed
Use the controls to control the playback of the selected cameras.
From left to right:
– Jump to the oldest recording
– Single frame backward no matter what frame type
– Play backward, you can change the playback speed with the speed
slider
– Pause play or or backward play
– Play, you can change the playback speed with the speed slider
– Single frame forward no matter what frame type
– Jump to the oldest recording
Enter the time for rapid positioning the Hairline in the Timeline.
Section 8.1 Using the Timeline
Click to move the Hairline to the time in the time field.
Section 8.1 Using the Timeline
Select the desired recording mode where you want to jump to.
Operator's Manual
Reference information | en
Operator Client | V3 | 2010.07
57