Using The Joystick; Using Softkeys - Bosch LTC-1311-20 Operator's Manual

36 en | Using a CCTV keyboard
3.
Displaying a camera in an analog monitor
1.
2.
3.
NOTICE!
When you call up a PTZ camera by a numeric command, the system automatically enters PTZ
mode.
10.2.4

Using the joystick

In Selection Mode, the joystick allows you to use the following features:
–
In PTZ Mode, the joystick allows you to use the following features:
–
–
–
In Jogshuttle Mode, twist the joystick to use the following features:
–
–
–
In Jogshuttle Mode, tilt the joystick to use the following features:
–
–
–
In Jogshuttle Mode, the Focus and Iris buttons allow you to use the following feature:
–
–
10.2.5

Using softkeys

The following operation modes are available:
–
–
Operator Client | V3 | 2010.07
Press the desired number of the camera and press ENTER.
The desired camera is displayed.
Example: Press Mon, 412, and ENTER. Then press 7 and ENTER. Camera 7 is displayed
on the 12th Image pane on workstation monitor 4.
Switch to analog mode.
Press Mon, press the number of the desired monitor, and press ENTER.
Monitor numbers are configured in the Configuration Client.
Press the desired number of the camera and press ENTER.
The desired camera is displayed.
Example: Press Mon, 3, and ENTER. Then press 4 and ENTER. Camera 4 is displayed in
the 3rd analog monitor.
Tilt the joystick to select an Image pane.
Twist the joystick to zoom in and out.
Tilt the joystick to pan and tilt a PTZ camera.
Use Focus and Iris buttons for a PTZ camera.
Play forward/backward as long as you twist.
Change the playback speed: Speed depends on the degree of rotation.
Stop a video when playing.
Tilt up / down when video is stopped: Play forward / backward.
Tilt up / down when video is playing: Set the playback speed.
Tilt right / left: Pause and step forward / backward.
Press Focus or Iris to move the hairline in the Timeline forward or backward. Focus
moves the hairline for a larger amount of time forward or backward, Iris moves the
hairline for a smaller amount of time forward or backward.
To lock the system in the current playback speed, press the Shot button while twisting
the joystick.
Tree Mode
You use this operation mode to control devices that are available in the Logical Tree of
the Operator Client.
Command Mode
You use this operation mode to send commands like switch to Playback Mode.
Operator's Manual
Bosch Video Management System
Bosch Sicherheitssysteme GmbH