40
en | Using a CCTV keyboard
10.3.3
Using the joystick
The joystick allows you to use the following features:
–
–
–
10.3.4
Using softkeys
The following operation mode is available:
–
To use the Command Mode:
The following commands are available:
–
–
Operator Client | V3 | 2010.07
Twist the joystick to zoom in and out.
Tilt the joystick to pan and tilt a PTZ camera.
Use Focus and Iris buttons for a PTZ camera.
Command Mode
Press a softkey to execute the desired command.
Start /stop alarm recording
Log off
Operator's Manual
Bosch Video Management System
Bosch Sicherheitssysteme GmbH