Using One Channel Audio Mode; Using Multichannel Audio Mode; Using Digital Zoom - Bosch LTC-1311-20 Operator's Manual

Bosch Video Management System
To start a camera sequence:
1.
2.
To pause a camera sequence:

To jump to the previous / next step of a camera sequence:

5.8

Using one channel audio mode

Main window
You use one channel audio mode when you want to hear only one audio source assigned to a
camera. You cannot activate audio for another camera.
To activate / de-activate multichannel audio mode:
1.
2.
5.9

Using multichannel audio mode

Main window
You use multichannel audio mode when you want to hear different audio sources at the same
time. You can activate different audio sources assigned to a camera in the Image pane of each
camera.
To activate / de-activate multichannel audio mode:
1.
2.
5.10

Using digital zoom

Main window
Every Image pane provides a digital zoom function.
To use digital zoom:
1.
2.
3.
Note:
You can also use the controls for digital zoom in the PTZ Control window.
Bosch Sicherheitssysteme GmbH
Select an Image pane where you want the sequence to be played.
Right-click a folder in the Logical Tree or Favorites Tree window and click Show as
sequence in selected Image pane.
The cameras of the selected folder are displayed one after the other in the selected
Image pane. indicates that the sequence is running.
In the Image window toolbar, click
The sequence stops playing, as indicated by
In the Image window toolbar, click
The sequence jumps to the previous or next step.
On the Extras menu, click Options....
Select the Playback audio of the selected Image pane check box.
On the Extras menu, click Options....
Select the Multichannel audio playback check box.
Right-click anywhere on an Image pane and click Zoom in.
indicates that the digital zoom was used.
Repeat the previous step several times to zoom in.
Right-click the Image pane and click Zoom 1:1 to return to the original size.
disappears.
Operator's Manual
Displaying camera images | en
.
.
or .
15
Operator Client | V3 | 2010.07