Seagate Lyve Rack R1 Installation Manual page 51

Netamsk for both servers:
Search domain for both servers:
Netamsk for both servers:
Search domain for both servers:
DNS server IP for both servers:
********************************************************************************
Given the above information,
we shall now proceed to configure Management Network interface with static IP
and related configuration.
Do you wish to proceed? (y/n): y
Preparing cluster pillar for setting management network configuration to static on srvnode-1
===============================================================
Setting Public Data Network to Static IP based configuration
================================================================================
You have selected to proceed with static IP based configuration for public data network interface.
Public Data IP for enp175s0f0 on Server-A: 172.16.0.116
Public Data IP for enp175s0f0 on Server-B: 172.16.0.117
Gateway IP for Public Data interfaces on both nodes [Optional]:
Netmask for Public Data interfaces on both nodes [255.255.252.0]: 255.255.0.0
********************************************************************************
You have provided the following information:
Public Data IP for interface enp175s0f0 on Server-A: 172.16.0.116
You have provided the following information:
Lyve Rack R1 Installation Guide
255.255.240.0
colo.seagate.com
255.255.240.0
colo.seagate.com
10.230.240.51
46
[480/606]
[416/606]