Seagate Lyve Rack R1 Installation Manual page 50

sh /opt/seagate/cortx/provisioner/cli/factory_ops/unboxing/init -M
10.230.255.5 -C 172.16.8.5
1.
DHCP
2.
Static
3.
Quit
Choose a network configuration for management network: 2
2 selected. Proceeding with Static IP configuration for Management Network.
===============================================================
Setting Management Network to Static
===============================================================
You have selected to proceed with static IP based configuration for management network interface.
Management IP for eno1 on Server-A: 10.230.244.178
Management IP for eno1 on Server-B: 10.230.244.160
Gateway IP for Management interfaces on both nodes: 10.230.240.1
DNS search domain for both nodes: colo.seagate.com
DNS server IP for both nodes: 10.230.240.51
Netmask for Management interfaces on both nodes [255.255.252.0]: 255.255.240.0
********************************************************************************
You have provided the following information:
Management IP for interface eno1 on Server-A:
Management IP for interface eno1 on Server-B:
Gateway IP for both servers:
Using Static virtual IP configuration
Lyve Rack R1 Installation Guide
10.230.244.178
10.230.244.160
10.230.240.1
45