Get Started; Basic Voice Commands - Chrysler 300c Owner's Manual

20_LX_OM_ENA_GCC_t.book Page 301

Get Started

All you need to control your Uconnect system
with your voice are the buttons on your steering
wheel.
Helpful hints for using Voice Recognition:
Visit UconnectPhone.com to check mobile

device and feature compatibility and to find
phone pairing instructions.
Reduce background noise. Wind and

passenger conversations are examples of
noise that may impact recognition.
Speak clearly at a normal pace and volume

while facing straight ahead. The microphone
is positioned on the rearview mirror and
aimed at the driver.
Each time you give a Voice Command, you

must first push either the Voice Recognition
(VR) or Phone button, wait until after the
beep, then say your Voice Command.
You can interrupt the help message or

system prompts by pushing the VR or Phone
button and saying a Voice Command from
the current category.
Uconnect Voice Command Buttons
1 — Push To Initiate Or To Answer A Phone Call,
Send Or Receive A Text
2 — For All Radios: Push To Begin Radio, Media,
Or Climate Functions. For Uconnect 4C NAV Sys-
tem Only: Push To Begin Navigation Function
3 — Push To End Call
MULTIMEDIA

Basic Voice Commands

The basic Voice Commands below can be given
at any point while using your Uconnect system.
Push the VR button . After the beep, say:
"Cancel" to stop a current voice session

"Help" to hear a list of suggested Voice

Commands
"Repeat" to listen to the system prompts

again
Notice the visual cues that inform you of your
voice recognition system's status. Cues appear
on the touchscreen.
301
9