Chrysler 300c Owner's Manual page 81

20_LX_OM_ENA_GCC_t.book Page 79
If the Battery Charge Warning Light is on it

may indicate a problem with the charging
system. Refer to "Battery Charge Warning
Light" in this section for further information.
The electrical loads that may be switched off (if
equipped), and vehicle functions which can be
affected by load reduction:
Heated Seat/Vented Seats/Heated Wheel

Heated/Cooled Cup Holders — If Equipped

Rear Defroster And Heated Mirrors

HVAC System

115 Volts AC Power Inverter System

Audio and Telematics System

Loss of the battery charge may indicate one or
more of the following conditions:
The charging system cannot deliver enough

electrical power to the vehicle system
because the electrical loads are larger than
the capability of the charging system. The
charging system is still functioning properly.
Turning on all possible vehicle electrical

loads (e.g. HVAC to max settings, exterior
and interior lights, overloaded power
outlets +12 Volts, 115 Volts AC, USB ports)
during certain driving conditions (city
driving, towing, frequent stopping).
Installing options like additional lights,

upfitter electrical accessories, audio
systems, alarms and similar devices.
Unusual driving cycles (short trips separated

by long parking periods).
The vehicle was parked for an extended

period of time (weeks, months).
The battery was recently replaced and was

not charged completely.
The battery was discharged by an electrical

load left on when the vehicle was parked.
The battery was used for an extended period

with the engine not running to supply radio,
lights, chargers, +12 Volt portable appli-
ances like vacuum cleaners, game consoles
and similar devices.
What to do when an electrical load reduction
action message is present ("Battery Saver On"
or "Battery Saver Mode")
During a trip:
Reduce power to unnecessary loads if

possible:
GETTING TO KNOW YOUR INSTRUMENT PANEL
Turn off redundant lights (interior or exte-

rior)
Check what may be plugged in to power

outlets +12 Volts, 115 Volts AC, USB
ports
Check HVAC settings (blower, tempera-

ture)
Check the audio settings (volume)

After a trip:
Check if any aftermarket equipment was

installed (additional lights, upfitter electrical
accessories, audio systems, alarms) and
review specifications if any (load and Ignition
Off Draw currents).
Evaluate the latest driving cycles (distance,

driving time and parking time).
The vehicle should have service performed if

the message is still present during consecu-
tive trips and the evaluation of the vehicle
and driving pattern did not help to identify the
cause.
79
3