Uconnect Voice Recognition; If Equipped; Introducing Voice Recognition; Basic Voice Commands - Chrysler GRAND CARAVAN 2023 Owner's Manual

36 GETTING TO KNOW YOUR VEHICLE
NOTE:
 The head restraints must be raised manually when
occupying the third row.
 Do not fold if there are passengers seated in the third
row seats.
The head restraint in the center position can be raised and
lowered for tether routing or height adjustment
page 139.
Ú
NOTE:
To remove the center head restraint, raise it as far as it
can go. Then, push the release button and the adjustment
button at the base of each post while pulling the head
restraint up. To reinstall the head restraint, put the head
restraint posts into the holes and push downward. Then,
using the adjustment button, adjust the head restraint to
the appropriate height.
Adjustment Button
WARNING!
ALL the head restraints MUST be reinstalled in the
vehicle to properly protect the occupants. Follow the
preceding reinstallation instructions prior to operating
the vehicle or occupying a seat.
UCONNECT VOICE RECOGNITION —

IF EQUIPPED

I V R
NTRODUCING OICE ECOGNITION
Start using Uconnect Voice Recognition (VR) with these
helpful quick tips. It provides the key Voice Commands
and tips you need to know to control your system.
B V C
ASIC OICE OMMANDS
The following basic Voice Commands can be given at any
point while using your Uconnect system.
Push the VR button or say the vehicle's Wake Up word,
"Hey Uconnect". The factory default Wake Up word is set
to "Hey Uconnect" and can be reprogrammed through the
Uconnect Settings. After the beep, say:
 "Cancel" to stop a current voice session.
 "Help" to hear a list of suggested Voice Commands.
 "Repeat" to listen to the system prompts again.
Notice the visual cues that inform you of your Voice
Recognition system's status.
G S
ET TARTED
The VR button is used to activate/deactivate your
Voice Recognition system.
Helpful hints for using Voice Recognition:
 Reduce background noise. Wind noise and passenger
conversations are examples of noise that may impact
recognition.
 Speak clearly at a normal pace and volume while facing
straight ahead.
 Each time you give a Voice Command, first push the VR
button, wait until after the beep, then say your Voice
Command. You can also say the vehicle "Wake Up"
word and state your command.
 A passenger can press the VR button shortcut on the
radio status bar to also issue a command.
 You can interrupt the help message or system prompts
by pushing the VR button and saying a Voice Command
or saying the vehicle's "Wake Up" word and saying a
command from the current category.