Chrysler 300c Owner's Manual page 229

20_LX_OM_ENA_GCC_t.book Page 227
Wiper Blade Removal/Installation
CAUTION!
Do not allow the wiper arm to spring back
against the glass without the wiper blade in
place or the glass may be damaged.
1. Lift the wiper arm to raise the wiper blade
off of the glass, until the wiper arm is in the
full up position.
Windshield Wiper Arm
1 — Wiper
2 — Locking Tab
3 — Wiper Arm
2. To disengage the wiper blade from the wiper
arm, flip up the locking tab.
Wiper Locking Assembly
1 — Wiper
2 — Locking Tab
3 — Wiper Arm
3. Slide the wiper blade down towards the
base of the wiper arm.
4. With the wiper blade disengaged, remove
the wiper blade from the wiper arm by
holding the wiper arm with one hand and
separating the wiper blade from the wiper
arm with the other hand (move the wiper
blade down toward the base of the wiper
arm and away from the J hook in the end of
the wiper arm).
SERVICING AND MAINTENANCE
Removing Wiper From Wiper Arm
1 — Wiper
2 — Locking Tab
3 — Wiper Arm J Hook
5. Gently lower the wiper arm onto the glass.
Installing The Front Wipers
1. Lift the wiper arm off of the glass, until the
wiper arm is in the full up position.
2. Position the wiper blade under the hook on
the tip of the wiper arm with the wiper
locking tab open.
3. Insert the receiver bracket on the wiper
assembly into the hook on the tip of the arm
through the opening in the wiper blade
under the locking tab.
227
7