Brake System; Wheel And Tire Torque Specifications; Torque Specifications - Chrysler 300c Owner's Manual

20_LX_OM_ENA_GCC_t.book Page 250
250 TECHNICAL SPECIFICATIONS
SRT
Engine
Power
Torque
Maximum Vehicle Speed
NOTE:
A chime will sound if the vehicle speed exceeds
75 mph (120 km/h).

BRAKE SYSTEM

Your vehicle is equipped with dual hydraulic
brake systems. If either of the two hydraulic
systems loses normal capability, the remaining
system will still function. There will be some loss
of overall braking effectiveness. This may be
evident by increased pedal travel during appli-
cation, greater pedal force required to slow or
stop, and potential activation of the Brake
Warning Light.
In the event power assist is lost for any reason
(for example, repeated brake applications with
the engine OFF), the brakes will still function.
The effort required to brake the vehicle will be
much greater than that required with the power
system operating.
NOTE:
Your vehicle is equipped with a high perfor-
mance braking system. The brake pads are a
semi-metallic compound, which offer superior
fade resistance for consistent operation. A
compromise to using this type of brake pad is
that the brakes may produce more brake dust
and may squeal slightly under certain weather
and operating conditions (i.e., during light brake
applications). These are considered normal
conditions.

WHEEL AND TIRE TORQUE SPECIFICATIONS

Proper lug nut/bolt torque is very important to
ensure that the wheel is properly mounted to
the vehicle. Any time a wheel has been removed
and reinstalled on the vehicle, the lug nuts/
bolts should be torqued using a properly cali-
brated torque wrench using a high quality six
sided (hex) deep wall socket.
6.4L
485 bhp (362kW) @ 6,100 RPM
475 lb- ft (644 N.m) @ 4,100 RPM
Consult your Salesperson

Torque Specifications

Base Model Vehicle
Lug Nut/Bolt **Lug Nut/
Torque Bolt Size
130 Ft-Lbs M14 x 1.50
(176 N·m)
SRT Model Vehicle
Lug Nut/Bolt **Lug Nut/
Torque Bolt Size
111 Ft-Lbs M14 x 1.50
(150 N·m)
**Use only authorized dealer recommended lug nuts/
bolts and clean or remove any dirt or oil before tight-
ening.
Lug Nut/Bolt
Socket Size
22 mm
Lug Nut/Bolt
Socket Size
22 mm