Chrysler 300c Owner's Manual page 131

20_LX_OM_ENA_GCC_t.book Page 129
Lower Anchors And Tethers For CHildren (LATCH)
Restraint System
LATCH Label
Your vehicle is equipped with the child restraint
anchorage system called LATCH, which stands
for Lower Anchors and Tethers for CHildren. The
LATCH system has three vehicle anchor points
for installing LATCH-equipped child seats. There
are two lower anchorages located at the back of
Frequently Asked Questions About Installing Child Restraints With LATCH
What is the weight limit (child's weight + weight of the
child restraint) for using the LATCH anchorage system to
attach the child restraint?
the seat cushion where it meets the seatback
and one top tether anchorage located behind
the seating position. These anchorages are
used to install LATCH-equipped child seats
without using the vehicle's seat belts. Some
seating positions may have a top tether
anchorage but no lower anchorages. In these
seating positions, the seat belt must be used
with the top tether anchorage to install the child
restraint. Please see the following table for
more information.
65 lbs (29.5 kg)
LATCH Positions For Installing Child Restraints In
This Vehicle
LATCH Positions For Installing Child Restraints In
This Vehicle
Lower Anchorage Symbol (2 Anchorages Per
Seating Position)
Top Tether Anchorage Symbol
Use the LATCH anchorage system until the combined
weight of the child and the child restraint is 65 lbs
(29.5 kg). Use the seat belt and tether anchor instead
of the LATCH system once the combined weight is more
than 65 lbs (29.5 kg).
SAFETY 129
4