Chrysler 300c Owner's Manual page 274

20_LX_OM_ENA_GCC_t.book Page 272
272 MULTIMEDIA
Setting Name
Blind Spot Alert — If Equipped
NOTE:
When this feature is selected, the Blind Spot Alert feature provides alerts, visual and/or audible, to indicate objects in your blind spot. The Blind

Spot Alert feature can be activated in "Lights" mode. When this mode is selected, the Blind Spot Monitor (BSM) system is activated and will only
show a visual alert in the exterior mirrors. When "Lights & Chime" mode is activated, the BSM will show a visual alert in the exterior mirrors as well
as sound an audible alert when the turn signal is on.
If your vehicle has experienced any damage in the area where the sensor is located, even if the fascia is not damaged, the sensor may have become

misaligned. Take your vehicle to an authorized dealer to verify sensor alignment. Having a sensor that is misaligned will result in the BSM not oper-
ating to specification.
ParkView Backup Camera Delay —
If Equipped
NOTE:
When the vehicle is shifted out of REVERSE (with camera delay turned off), the rear camera mode is exited and the previously viewed screen appears
again. When the vehicle is shifted out of REVERSE (with camera delay turned on), the rear view image with dynamic grid lines will be displayed for up
to 10 seconds after shifting out of "REVERSE" unless the forward vehicle speed exceeds 8 mph (12 km/h), the transmission is shifted into "PARK"
or the ignition is switched to the OFF position.
Active ParkView Backup Camera
Guidelines — If Equipped
NOTE:
Your vehicle may be equipped with the "Active ParkView Backup Camera Guidelines" that allows you to see active guidelines over the ParkView
Backup camera display whenever the gear selector is put into REVERSE. The image will be displayed on the radio touchscreen display along with a
caution note to "check entire surroundings" across the top of the screen. After five seconds, this note will disappear.
Selectable Options
Off Lights
On
On
Lights & Chime
Off
Off