Advertisement
Quick Links
Chrysler 300C Sedan
TECHNICAL SPECIFICATIONS
Body and chassis
Five-seater, four-door sedan, all-steel unitary body chassis. Choice of three
longitudinally mounted front engines driving the rear wheels via a four-speed
automatic or five-speed automatic transmission and a sub-frame mounted
rear differential.
Long/Wide/Height (mm)
Axle distance (mm)
Front/Rear Wheel distance (mm)
Minimum turning diameter (m)
Minimum height to ground (mm)
General Vehicle Weight (Kg)
Tank capacity (L)
Engines
5.7L HEMI®
Type
Capacity
Maximum power
Maximum torque
Compression ratio
Bore and stroke
5015/1880/1475
3050
1600/1605
11.9
160
1740/1775/1885
68/68/72
Petrol, eight-cylinder, V-type, 90-degree;
with hemispherical combustion
chambers within aluminum cylinder
heads and Multi-Displacement System
(MDS)
5.7L (5654 cc/345.0 cu. in.)
252 kW (342 hp DIN) @ 5000 rpm
545 N•m @ 4000 rpm
9.6:1
99.5 x 90.9 mm (3.92 x 3.58 in.)
Advertisement
Related Manuals for Chrysler 300C Sedan
Summary of Contents for Chrysler 300C Sedan
- Page 1 Chrysler 300C Sedan TECHNICAL SPECIFICATIONS Body and chassis Five-seater, four-door sedan, all-steel unitary body chassis. Choice of three longitudinally mounted front engines driving the rear wheels via a four-speed automatic or five-speed automatic transmission and a sub-frame mounted rear differential.
- Page 2 3.5L High Output Type Petrol, six-cylinder, V-type, 60-degree Capacity 3.5L (3518 cc/214.7 cu. in.) Maximum power 188 kW (255 hp DIN) @ 6800 rpm Maximum torque 340 N•m @ 3800 rpm Compression ratio 10.0:1 Bore and stroke 96.0 x 81.0 mm (3.78 x 3.19 in.) 2.7L Type Petrol, six-cylinder, V-type, 60-degree...
- Page 3 Driveline Rear-wheel drive Two-piece driveshaft with subframe-mounted rear differential; half-shaft to each rear wheel fitted with two CV universal joints Chassis and running gear Front suspension Double wishbones, coil springs and gas-filled shock absorbers Rear suspension Independent five-link, coil springs and gas-filled shock absorbers Steering Hydraulic power-assisted...