Eco Mode - If Equipped - Chrysler 300c Owner's Manual

Hide thumbs Also See for 300c:
Table of Contents

Advertisement

20_LX_OM_ENA_GCC_t.book Page 295
Activate Launch Control
Launch Control can be accessed by pushing the
Launch Control button on the instrument panel
switch bank or pressing the SRT button on the
instrument panel switch bank then selecting
the Race Options button on the touchscreen.
Press the Activate Launch Control button on the
touchscreen to activate the feature. Use the
"Launch RPM Set-Up" vertical bar to set the
holding RPM. Launch Mode can be turned on or
off by either pushing the Launch Control button
on the instrument panel switch bank (if acti-
vated), or by pressing the Cancel Launch Mode
button on the touchscreen.
Launch RPM Set-Up
To adjust the Launch RPM, drag the slider bar or
press the arrows on the touchscreen to adjust
the holding RPM. The launch RPM limit will
display digitally on the gauge.
MULTIMEDIA
ECO MODE — IF EQUIPPED
Eco Mode
Press the Eco button on the touchscreen on the
SRT Drive Modes main menu. Eco mode modi-
fies the vehicle's engine and transmission
settings to provide improved fuel economy at a
trade-off with acceleration performance.
Increased engine exhaust noise and/or vibra-
tion may be noticed while Eco is active. This is
normal and a result of the increased amount of
operating conditions where the vehicle is
allowed to operate in four cylinder shutoff
mode.
295
9

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents