Replacing Hardware Components - Nortel CallPilot 702t Installation And Configuration Manual

October 2002

Replacing hardware components

Introduction
This guide describes how to replace or install hardware components as
follows:
To replace or install
the server cover, or cooling
fan
the hard drive, tape drive,
CD-ROM drive, or floppy
diskette drive
the RAID card
MPC-8 cards
MPB16-4 boards
the Ethernet network interface
card
memory modules
the CPU
the BIOS
Part 5: 702t Server Maintenance and Diagnostics
See
Chapter 7, "Replacing basic chassis
components" on page 115
Chapter 8, "Replacing a hard drive,
tape drive, CD-ROM drive, or floppy
drive" on page 125
Chapter 9, "Performing RAID
maintenance" on page 147
Chapter 10, "Replacing or adding
voice processing boards" on page 241
Chapter 11, "Replacing network
cards" on page 255
Chapter 12, "Replacing DIMMs and
the CPU" on page 259
Chapter 12, "Replacing DIMMs and
the CPU" on page 259
Chapter 13, "SSU and BIOS" on page
265
About this guide
17