Replacing Hardware Components - Nortel CallPilot 201i Installation And Configuration Manual

October 2002

Replacing hardware components

Introduction
This guide describes how to replace or install hardware components as
follows:
To replace or install
the 201i server (in the event
of a complete system failure)
the hard drive
the software feature key
(dongle)
MPC-8 cards
Approved replacement parts
Before replacing any parts on your server, refer to the Nortel Networks
product catalog for the part codes.
.
Part 5: 201i Server Maintenance and Diagnostics
CAUTION
Risk of system damage
The use of parts that are not approved by Nortel Networks can
cause serious system problems or void your Nortel Networks
warranty.
See
"Replacing the server" on page 121
"Replacing the IDE hard drive" on
page 125
"Replacing the software feature key"
on page 132
"Replacing Multimedia Processing
Cards" on page 134
About this guide
15