Overview - Nortel CallPilot 1002rp Installation And Configuration Manual

Maintaining the Pentium III SBC card

Overview

Introduction
This section describes the Pentium III Single Board Computer (SBC) card.
It covers procedures for replacing and configuring the SBC card.
The SBC card is always installed in the SBC slot located between the ISA
expansion slots and the PCI slots on the backplane.
Procedures included
Procedures covered include the following:
replacing the SBC card (page 197)
upgrading and configuring the BIOS (page 201)
adding memory DIMMs to the SBC (page 204)
Intended audience
This section is written primarily for field service technicians. It is intended
to act as a guide for installing, repairing, replacing, and upgrading hardware
and software components. This section assumes that the reader has basic
computing skills, is familiar with necessary safety procedures, and has the
hardware documentation provided by the manufacturer available as a
reference.
196
Standard 1.0
CallPilot