Ricoh J2SS-C3 Service Manual page 62

SERVICE TOOLS
Mode No.
Emergency Stop
Key Function
Setting
57
Repeat Copy
Length Limit Setting
58
Misfeed Special
59 Recovery Mode
Fixed Paper Length
Special Mode
60
Fixed Paper Length
Special Mode
61
Function
Determines how the emergency stop
key functions.
When set to 0, the emergency stop key
only stops the original drive.
When set to 1, it stops the original
drive, main motor drive, and roll feed
drive (B048 copier only).
When a roll runs out of paper, if a layer
of white paper remains wrapped
around the core, the machine might
not detect the paper end condition.
This can cause a noise or a Wrong
Paper Feed error. If this SP is set to 1,
you can use the emergency stop key
to recover from this error.
Determines the maximum copy length
for multiple copies (B048 copier only).
While the Emergency Stop key is held
down, power is still supplied to the
main motor and registration clutch.
Adjusts the size of the selected preset
paper size.
Each time the +/– keys are pressed
while holding down the Preset Cut key,
the preset paper size is adjusted by
the amount selected in SP 61.
Selects the interval of each step for
SP60.
4-8
11 May, 2001
Data
0: Only original drive
1: Original, main motor,
roll feed drives.
0: 1,200 mm/48 inch
1: The maximum paper
length determined by
SP55.
0: No
1: Misfeed Special
Recovery Mode
0: Normal
1: Fixed Paper Length
Special Mode
(In mm mode)
0: 100 mm
1: 50 mm
2: 60 mm
3: 120 mm
4: 200 mm
5: 240 mm
6: 250 mm
7: 500 mm
8: 600 mm
(In inch mode)
0: 10.0 inch
1: 5.0 inch
2: 6.0 inch
3: 12.0 inch
4: 20.0 inch
5: 24.0 inch
6: 25.0 inch
7: 50.0 inch
8: 60.0 inch