Table of Contents
Advertisement
11 May, 2001
[D]
[C]
Preparation for the B047 copier on the roll feeder.
When B047 copier is placed on the roll feeder, first remove the lower front cover [A]
and the manual feed table [B] for installation.
1. Remove the lower front cover [A] (2 screws), reinforcement plate [C] (1 screw),
bracket [D] (4 screws) (which is hung by the harness), and the manual feed
table [B].
2. Put back the bracket and reinforcement plate.
[B]
3-5
INSTALLATION PROCEDURE
[A]
B047I024.WMF
Advertisement
Table of Contents
