Ricoh J2SS-C3 Service Manual page 40

INSTALLATION PROCEDURE 11 May, 2001
[C]
[B]
[F]
[A]
B439I500.WMF
[A]
[E]
[C]
[D]
[B]
B439I551.WMF
1. Loosely install the top plate [A], left [B], and right side plate [C] (6 screws).
2. Turn the table up-side down. Be sure to rotate it as shown in the illustration.
3. Install the middle plate [D] and rear cover [E] (4 screws each).
4. Tighten all the screws until the spring washers [F] are completely flat.
5. Turn the table right-side up.
3-14