Table of Contents
Advertisement
11 May, 2001
3. INSTALLATION
3.1 INSTALLATION REQUIREMENTS
3.1.1 ENVIRONMENT
1. Temperature Range:
2. Humidity Range:
3. Ambient Illumination:
4. Ventilation:
5. Ambient Dust:
6. If the location is air-conditioned or heated, place the machine as follows:
a) Where it will not be subjected to sudden temperature changes from low to
high, or vice versa.
b) Where it will not be directly exposed to cool air from an air conditioner in
the summer.
c) Where it will not be directly exposed to heat.
7. Avoid exposure to corrosive gases.
8. Avoid installing anywhere higher than 2,000 m (6,500 ft) above sea level.
9. Place the machine on a strong and level base.
10. Avoid any area where the machine may be subjected to frequent, strong
vibration.
15°C to 30°C (50°F to 86°F)
20% to 80% RH
Less than 1,500 lux (do not expose to direct
sunlight).
Room air should turn over at least 3 times per hour.
Less than 0.10 mg/m
3-1
INSTALLATION REQUIREMENTS
3
-6
3
(2.7 x 10
oz/yd
)
Advertisement
Table of Contents
