Making The Monitor Band/Channel Measurement; Purpose; Measurement Method; Making The Measurement - Agilent Technologies ESA-E Series Measurement Manual

Making Bluetooth™ Measurements

Making the Monitor Band/Channel Measurement

Making the Monitor Band/Channel Measurement

Purpose

This measurement can be used to visually check either the Bluetooth™ band or
individual channels. In Monitor Band, you can easily check the channel occupancy
and flatness when frequency hopping is on. In Monitor Channel you can verify the
correct spectral shape of the selected channel.
Any interfering signals may also be apparent when using this measurement.

Measurement Method

This procedure scans the specified band or channels. By placing markers on the
trace it is possible to check the band/channels for interference or other
impairments. A Max Hold function enables monitoring over time. This is useful
for dealing with hopping signals.

Making the Measurement

1. Press the
2. Press the
The factory default settings provide the optimal settings for viewing the
NOTE
Bluetooth™ band or channels. For special requirements, you may need to change
some of the settings.
Press
parameters for the current measurement to their default settings.
• Mode setup and frequency/channel parameters.
• Measurement setup parameters.
22
Measure key.
Monitor Band/Channel
Meas Setup , More (1 of 2)
Use the and
Mode Setup
parameters for all measurements made within the current mode. For further
information, refer to Chapter 1 of this document.
These are measurement specific parameters that are changed using the
measurement setup ( Meas Setup
settings at any time by pressing
Defaults . For further information on measurement setup parameters, refer to
the ESA-E Series Spectrum Analyzers Bluetooth™ Measurement Personality
User's Guide.
key.
, Restore Meas Defaults
keys to change these
Frequency Channel
) menu. Parameters can be returned to default
Meas Setup , More (1 of 2)
at any time to return all
and Restore Meas
Chapter 3