Results; Troubleshooting Hints - Agilent Technologies ESA-E Series Measurement Manual

Making Bluetooth™ Measurements
Making the Modulation Overview Measurement
• Measurement setup parameters.

Results

Figure 3-1 Modulation Overview Measurement Results
Results are shown in numeric format beneath the trace. To view this section of the
NOTE
window in its entirety, press the
then press the
window.

Troubleshooting Hints

• If an external attenuator is used, be sure to include the attenuation value in the
• If an external preamplifier is used, be sure to include the gain value in the
16
These are measurement specific parameters that are changed using the
measurement setup (
Meas Setup
settings at any time by pressing
. For further information on measurement setup parameters, refer to
Defaults
the ESA-E Series Spectrum Analyzers Bluetooth™ Measurement Personality
User's Guide.
Zoom menu key. This can also be used for zooming in on the trace
measurement. This can be accessed by pressing
measurement. This can be accessed by pressing
) menu. Parameters can be returned to default
Meas Setup , More (1 of 2)
menu key until it is highlighted,
Next Window
Input
Input
and Restore Meas
, Ext Atten .
, Ext Gain .
Chapter 3