Preparing To Make Measurements; Initial Settings; How To Make A Measurement - Agilent Technologies ESA-E Series Measurement Manual

Preparing to Make Measurements

At initial power up, the analyzer is in spectrum analyzer (SA) mode, with the Meas
Off softkey selected in the
displayed.
To access the Bluetooth™ measurement personality, press the
key and select the

Initial Settings

Before making a measurement, make sure the mode setup, measurement setup, and
frequency channel parameters are set to the appropriate settings. For further
information refer to the Mode Setup, Measurement Setup, and FREQUENCY
Channel sections in Chapter 5 of the ESA-E Series Spectrum Analyzers
Bluetooth™ Measurement Personality User's Guide.
• Resetting all parameters:
To tupı˝0l4(o)9( t)-1 insmen2or10(u9(ement12()1(r-1(au9(t1(r)9(e) per)9(s)-2( ()9(i)n( ac)lu(mo
1
B
Chapter 2
•
Preparing to Make Bluetooth™ Measurements
MEASURE menu and the
menu key.
Bluetooth
Preparing to Make Measurements
FREQUENCY Channel
front panel
MODE
menu
9