Bluetooth™ Measurements - Agilent Technologies ESA-E Series Measurement Manual

Preparing to Make Bluetooth™ Measurements
Bluetooth™ Measurements
Bluetooth™ Measurements
The following Bluetooth™ measurements are available in Bluetooth™ mode and
described in this document:
Modulation
Overview
Output
Power
Carrier
Frequency Drift
Monitor
Band/Channel
Initial Carrier
Frequency Tolerance
Modulation
Characteristics
Output Spectrum
Bandwidth
Adjacent Channel Power
These are referred to as one-button measurements.
When you press the key to select the measurement it becomes the active
measurement, using settings and a display unique to that measurement. Data
acquisitions automatically begin provided trigger requirements, if any, are met.
6
provides a quick indication of
overall modulation behavior
power measurements in the
time domain
tests the frequency drift
of the signal
view specific channels or
the entire band
tests accuracy of the
transmitter's carrier frequency
frequency deviation
measurement
verifies the emissions bandwidth
inside the operating frequency
verifies the emissions power level
inside the operating range
Chapter 2