Hardware Availability - Agilent Technologies ESA-E Series Measurement Manual

Hardware Availability

If the RF Comms hardware (Option B7E) is installed in the instrument, the
measurements will provide support for all of the hardware triggering methods
including RF Burst, External, and Free Run. Video triggering is available for the
Output Power measurement only.
If the RF Comms hardware (Option B7E) is not installed in the instrument, the
measurements cannot provide the full flexibility described in the following pages.
Triggering is limited to Free Run or External, with External being the default.
The FM demod hardware (Option 106) must be present to make the measurements.
If the FM demod hardware is not installed in the instrument, the demod
measurement softkeys:
Modulation Overview
Carrier Freq Drift
ICFT
Modulation Characteristics
will be grayed out in the Measure menu and those measurements will be
unavailable. The other measurements will still be available, although the Preamble
Burst Sync selection in the Output Power measurement will be grayed out and
unavailable.
Chapter 2
Preparing to Make Bluetooth™ Measurements
Bluetooth™ Measurements
7