Troubleshooting Hints - Agilent Technologies ESA-E Series Measurement Manual

Making Bluetooth™ Measurements
Making the Monitor Band/Channel Measurement
Checking Individual Channels for Signs of Interference
Figure 3-6
Channel Span
Center Freq
Figure 3-6 Monitor Band/Channel−Channel Method

Troubleshooting Hints

• If an external attenuator is used, be sure to include the attenuation value in the
• If an external preamplifier is used, be sure to include the gain value in the
24
shows the Monitor Band/Channel display with
set to
Three
is set to 2402 MHz (Channel 0).
measurement. This can be accessed by pressing
measurement. This can be accessed by pressing
, a hopping signal applied, and
Method set to Channel
turned on.
Max Hold
Input , Ext Atten .
Input , Ext Gain .
Chapter 3
,