Results
Figure 3-3
Output Power Measurement Results
Results are shown in numeric format beneath the trace. To view this section of the
NOTE
window in its entirety, press the
then press the
window.
Troubleshooting Hints
• If an external attenuator is used, be sure to include the attenuation value in the
• If an external preamplifier is used, be sure to include the gain value in the
Chapter 3
menu key. This can also be used for zooming in on the trace
Zoom
measurement. This can be accessed by pressing
measurement. This can be accessed by pressing
Making Bluetooth™ Measurements
Making the Output Power Measurement
Next Window
menu key until it is highlighted,
Input
Input
,
.
Ext Atten
,
.
Ext Gain
19