Agilent Technologies ESA-E Series Measurement Manual page 16

Preparing to Make Bluetooth™ Measurements
Preparing to Make Measurements
Even though the measurements are designed as one-button measurements, you
may change the default settings using various setup keys. However, changing the
default settings may produce measurement results that are outside of the
parameters of the selected standard.
Most measurements can be performed using the simple four-step procedure
outlined in the table below. Most measurements are performed using only the
primary keys listed in conjunction with a minimum of setup keys. Measurement
setup keys (
more information see
Step
1. Select and
setup mode
2. Select and setup
measurement
3. Select and
setup view
4. Saving and
printing results
a. Span and Amplitude are disabled for all measurements except Monitor Band/Channel
10
) can be used for non-standards compliant testing. For
Meas Setup
"Initial Settings"
Primary Key Setup Keys
MODE Mode Setup
FREQUENCY Channel
MEASURE Meas Setup
Restore Meas Defaults
View/Trace
Span X Scale
Amplitude Y Scale
File Print Setup
Print
above.
Related Keys
,
System
,
Meas Control
Restart
a Marker
,
Search
a
,
Display
Save
,
,
Chapter 2