Omron Sysmac CJ Series Connection Manual page 60

●Internal addresses
T hese addresses are used to operate this program only.
Address Data type
5000.01 BOOL Local_PMCRExecuting
5000.04 BOOL Local_PMCRNormalE
500 0.05 BOOL Local_PMCRErr
500 .06 0 BOOL Local_DestinationDeviceError
5 000.07 BOOL Local_PMCRErrorCode
5 010 UINT L ocal_ControlWord1
5 011 UINT Local_ControlWord2
5 012 UIN T Local_P
5020 U INT Local_FirstSendWord
5500 UINT Local_FirstReceiveWord
5501 UINT Local_ReceiveSymbolArea_Res
ponseCode
Symbol name
nd
orEnd
MCR_ErrorCod e
Explanation
Indicates the PMCR instruction execution status.
This flag turns ON when the
being execu ted, and turns OFF when the PMCR
instruction is not executed.
Turns ON when the PMCR instruction ends normally.
Turns ON when a communications error (e.g.,
transmission error) occurs.
Turns ON when a destination device error occurs.
Turns ON when any of the following PMCR instruction
errors occurs.
(1) Sequen ce No. error
(2) Data read/write area exceeded error
(3) Protocol macro syntax error
Execution parameter of PMCR instruction.
Execution parameter of PMCR instruction.
Stores the error cod e when a PM
occurs.
Sets the number of send message words of
PMCR instruction.
Stores the number of message words received from
the destination device.
Stores the error code of a destination device when a
destination device error occ
9. Program
PMCR instruction is
CR instruction error
the
urs.
57