Initialization Method; Initializing The Plc - Omron Sysmac CJ Series Connection Manual

8.

Initialization Method

This document explains the setting procedure from the factory default setting.
If the device settings are changed from the factory default setting, some settings may not be
applicable as described in this procedure.

8.1. Initializing the PLC

T o initialize the PLC, you ne
Change to PROGRAM mode before initialization.
8.1.1. Serial Communications Unit
To initialize the settings of the Serial Communication Unit, select Edit - I/O Table and Unit
Setup from the PLC Menu of the CX-Programmer.
On the PLC I/O Table Window, right-click the Serial Communication Unit and select Unit
Setup.
On the View Parameters Dialog Box, click the Set Defaults Button and click the Transfer [PC
to Unit] Button.
ed to initialize the Serial Communications Unit and the CPU Unit.
8. Initialization Method
46