Table of Contents
Advertisement
Chapter 3
3.3.9 Remove Disk Array
The following steps shall be taken to remove disk array.
1. Select the disk array to be deleted in the disk tree.
2. Click
Remove
3. In the popup dialog box, select
select
No
to cancel the remove operation.
4. After the remove operation is complete, shut down all other programs.
Then click
Yes
computer later.
Note:
1. Remove mirror array operation will generate two physical disks
with the identical data on each.
2. Remove 0+1 array operation will generate two stripe arrays with
the identical data on each.
Warning:
1. Remove stripe array operation will lead to the data on the striping
disks all destroyed.
2. Remove span array operation will lead to the data on the first disk
reserved while the data on other disks will be all destroyed.
icon on the tool bar.
Yes
to confirm the remove operation,
to restart the computer, or select
3-28
Trouble Shooting
No
to restart the
Advertisement
Table of Contents
Troubleshooting
