Installation Of Driver; Introduction; Windows 98/Me - Biostar M6TSU User Manual

Chapter 3

3.2 Installation of Driver

3.2.1 Introduction

After the computer start up, you shall install RAID driver.

3.2.2 Windows 98/ME

Automatic Installation
After the computer start-up, Windows system will find the newly installed RAID
adapter and ask you to install its driver. Please follow the prompt to finish the
driver installation.
Manual Installation
If Windows can not find new hardware, the driver can be installed through the
following steps :
1. Shut down all programs.
2. Click Start-->Setup-->Control
New Hardware
3. Click Next in the popup window to continue.".
4. A dialog box will appear and ask whether to let windows search
new hardware. Select
list. Then click Next
5. Hardwares of different types will be shown in the follow-on window.
Select SCSI Controllers
6. Insert the floppy disk of driver into the floppy drive, then click
7. A dialog box will pop up, input the path of driver A:\Win9X.Then
click OK to continue.
8. In the follow-on window, select
then click Next to continue.
9. Follow the system prompt to install driver. When finished, restart
the computer.
Panel, then double-click on
icon.
No,I want to select the hardware form a
to continue.
and then click Next
HPT370 UDMA/ATA100 RAID Controller
3-2
Trouble Shooting
Add
to continue.
Have Disk....