Windows 2000 - Biostar M6TSU User Manual

Chapter 3

3.2.4 Windows 2000

Install driver under Windows 2000
Automatic Installation
Start the computer and enter the operating system of Windows 2000, the
system will automatically detect new hardware and prompt users to install the
driver. Please insert the floppy disk of driver and follow the system prompt to
finish the driver installation and restart the computer.
Manual Installation
If Windows can not find new hardware, the driver shall be installed through the
following steps :
1. Click Start-->Setup-->Control
Hardware. In the follow-on window, Click
2. In the follow-on window, select the first item
device, then click
3. In the follow-on device list, select the first item
then click Next
4. Then the system will ask
your new hardware?
hardware from a
5. In the follow-on window of device types, select
controllers, then click
6. In the follow-on window, select
7. Please insert the floppy disk of driver and input path name
into Copy manufacturer's files from:
8. In the follow-on type column, select
Controllers.
9. Follow the system prompt to finish the installation, and restart
the computer.
Install driver in the process of Windows 2000
installation
1. If Windows 2000 is installed from the floppy drive, please let the installing
program run automatically. If Windows 2000 is installed from the
CD-ROM drive, please
need to install third party SCSI or RAID driver
type Winnt and install, after files have been copied and the computer
Panel, select
Next to continue.
to continue.
Did you want Windows to search for
Please select No, I want to select the
list. Then click Next to continue.
Next to continue.
Have Disk....
column, then click OK.
HPT370 UDMA/ATA100 RAID
F6 key when the message
3-6
Trouble Shooting
Add/Remove New
Next to continue.
Add/Troubleshoot a
Add New Device,
SCSI and RAID
A:\Win2k
Press F6 if you
appears. If it is to