Biostar M6TSU User Manual page 107

Chapter 4
No display on screen.
PROBABLE CAUSE
Faulty Monitor.
CMOS incorrectly set
up.
C: drive failure.
PROBABLE CAUSE
Hard drive cable not
connected properly.
Cannot boot system after installing second hard drive.
PROBABLE CAUSE
Master/slave jumpers
not set correctly.
Hard drives not
compatible / different
manufacturers.
PROBLEM
DIAGNOSIS
If possible, connect
monitor to another
system. If no color
replace monitor.
Call technical support.
PROBLEM
DIAGNOSIS
Check hard drive cable.
PROBLEM
DIAGNOSIS
Set master/slave
jumpers correctly.
Run SETUP program
and select correct drive
types. Call drive
manufacturers for
compatibility with other
drives.
4-5
Trouble Shooting
SOLUTION
SOLUTION
SOLUTION