Table of Contents
Advertisement
Chapter 3
3.4.3 Delete RAID
The following steps shall be taken to delete RAID.
1. In the menu zone, select
this operation and go to next.
2. In the validated channel status zone, use the arrow key to select
the disk array to be deleted and press
3. Press
Y
when warned
array?
3.4.4 Rebuild Mirror Array
The following steps shall be taken to rebuild the mirror array.
1. In the menu zone, select
confirm this operation and go to next.
2. In the menu zone of the popup sub-interface, select
Source Disk: None
3. In the validated channel status zone, select the source disk of the
mirror array and then press Enter.
4. In the menu zone of the popup sub-interface, select
Disk: None
5. In the validated channel status zone, select the target disk of the
mirror array and then press Enter.
6. In the menu zone of the popup sub-interface, select
Process
and press
7. Press
Y
when asked
Continue?
2. Delete RAID
Enter
Are you sure you want to remove the disk
3. Rebuild Mirror Array
and press
Enter
to confirm.
and press
Enter
to confirm.
Enter
to confirm.
The last time rebuild not completed.
3-35
Trouble Shooting
, press
Enter
to confirm
to confirm.
, press
Enter
to
1. Select
2. Select Target
3. Start Duplication
Advertisement
Table of Contents
Troubleshooting
