Windows Nt4.0 - Biostar M6TSU User Manual

Chapter 3

3.2.3 Windows NT4.0

Install driver under Windows NT4.0
1. Click Start-->Setup-->Control
Adapter icon.
2. In the follow-on window, select
3. In the follow-on window, select
4. Insert the floppy disk of driver, input the path of driver A:\WinNT,
then click OK.
5. In the follow-on window, select
item, then click OK.
6. Follow the system prompt to install the driver. When finished, re-start
the computer.
Install driver in the process of Windows NT4.0
installation
1. Press F6 key when the system prompts
computer's hardware configuration.
2. Press F6 key, the installation will continue. Later, installation pro
gram will remind user to press
press S key.
3. In the follow-on
press Enter to confirm.
4. The installation program will prompt users to insert the floppy disk
of driver. Please insert it and then press
5. In the follow-on window, select
then press Enter
6. The follow-on interface will list the devices to be installed, in which
UDMA/ATA100 RAID Controller
to install other devices, please operate at this time. If all devices have
been successfully installed, please go to next.)
7. Press Enter to continue the installation of Windows NT4.0.
Panel, then double-click
Driver item. then click
Have Disk.
HPT370 UDMA/ATA100 RAID Controller
Setup is inspecting your
S key to specify other devices. Please
Device Type window, select
Enter
HPT370 UDMA/ATA100 RAID
to confirm.
item should be included.( If users
3-4
Trouble Shooting
SCSI
Add button.
Other item, then
to confirm.
Controller,
HPT370
want