Run Raid Administrator - Biostar M6TSU User Manual

Chapter 3

3.3.2 Run RAID Administrator

The following steps should be taken to run RAID Administrator.":
1.Click Start-->Program-->RAID Administrator-->RAID
2.Then the main interface of RAID Administrator will come up. (see below).
Tool Bar:
It provides shortcut way to execute the common commands. Commands shown
by Tool Bar can also be found under
Disk Tree:
It shows the connecting information of all hard disks in two ways:
View by Device
Status Pane:
It lists the information and working status of selected hard disks or disk arrays.
Configuration
and View by Adapter.
3-10
Trouble Shooting
Administrator.
menu.