Biostar M6TSU User Manual page 58

Chapter 2
For example: If set to "Former-Sts" and AC power is lost when system is live,
then after AC power is restored, the system will automatically power on. If AC
power is lost when system is not live, system will remain powered off.
CPU THRM-Throttling
Select the CPU THRM-Throttling rate.
The Choices: 50.0% (default), 75.5%, 62.5%, 87.5%, 37.5%, 25%,
12.5%.
Resume by Alarm
This function is for setting date and time for your computer to boot up. During
Disabled, you cannot use this function. During Enabled, Choose the Date and
Time Alarm:
Date (of Month) Alarm
Time (hh:mm:ss) Alarm
Note: If you have change the setting, you must let the system boot up until it
goes to the operating system, before this function will work.
Reload Global Timer Events
Reload Global Timer Events are I/O events whose occurrence can prevent the
system from entering a power saving mode or can awaken the system from such a
mode. In effect, the system remains alert for anything, which occurs to a device,
which is configured as Enabled, even when the system is in a power down mode.
Primary IDE 0/1
Secondary IDE 0/1
FDD, COM, LPT Port
PCI PIRQ [A-D]#
You can choose which month the system
will boot up.
You can choose shat hour, minute and
second the system will boot up.
2-23
BIOS Setup