Biostar M6TSU User Manual page 56

Chapter 2
Video Off Method
This option determines the manner in which the monitor is goes blank.
V/H SYNC+Blank
This selection will cause the system to turn off the vertical and
horizontal synchronization ports and write blanks to the video buffer.
Blank Screen (default)
This option only writes blanks to the video buffer.
DPMS Support
Initial display power management signaling.
Video Off In Suspend
This determines the manner in which the monitor is blanked.
The Choices: No (default), Yes.
Suspend Type
Select the Suspend Type.
The Choices: Stop Grant (default), PwrOn Suspend.
Modem Use IRQ
This determines the IRQ, which can be applied in MODEM use.
The Choices: NA (default), 3, 4, 5, 7, 9, 10, 11.
Suspend Mode
When enabled and after the set time of system inactivity, all devices except the
CPU will be shut off.
The Choices: Disabled (default), 1Min, 2Min, 4Min, 8Min, 12Min,
20Min, 30Min, 40Min, 1Hour.
HDD Power Down
2-21
BIOS Setup