Biostar M6TSU User Manual page 72

Chapter 3
restarted, press
computer's hardware configuration
2. Press S key to specify additional devices when the
Setup window appears.
3. In the follow-on window of device type, please select
Enter to continue.
4. Insert the floppy disk of driver, then press
5. The system will ask whether to install driver under
Windows 2000, please select to install driver under
6. The follow-on interface will list the devices to be installed, in which
HPT370 UDMA/ATA100 RAID Controller
users want to install other devices, please operate at this time. If all devices
have been successfully installed, please go to next.)
7. Press Enter to continue Windows 2000 setup.
F6 key when the message Setup is inspecting your
appears.
3-7
Trouble Shooting
Windows 2000
Other and press
Enter to continue.
WinNT or under
Windows 2000.
item should be included.( If