Set Boot Disk - Biostar M6TSU User Manual

Chapter 3

3.4.8 Set Boot Disk.

The following steps shall be taken to set the boot disk:
1. In the menu zone, select
confirm this operation and go to next .
2. In the validated channel status zone , use the arrow key to select the
boot device and press
Note:
1. The Set Boot Disk
connected to IDE on motherboard.
2. After the boot disk is set, its status will become Boot.
7. Set Boot Disk item, press
Enter to confirm.
item appears on condition that no hard disk is
3-37
Trouble Shooting
Enter to