Table of Contents
Advertisement
KP100G
Install the Data Logger independently
The data logger can be easily detached and be installed in the wall.
(1) To detach the data logger, push the side of it and pull out.
Push and pull out
Fig, 5-14 Detach the securing plate
(2) Insert 2 screws and tighten to attach the securing plate to data logger.
Securing plate
Fig, 5-15 Attach the securing plate
(3) Drill 2 holes in the wall, and then drive in the 2 Snap Bushings. Now insert the screws and tighten to fix data logger in place.
Fig, 5-16 Install the Data Logger
21
Advertisement
Table of Contents
