WARNING
Uncoordinated settings of
spring preload and spring
strut damping.
Poorer handling.
Adjust damping characteristic
to changed spring preload.
To increase spring preload,
turn adjustment wheel 1 clock-
wise using toolkit.
To decrease spring preload,
turn adjustment wheel 1 coun-
terclockwise using toolkit.
Basic setting of spring
preload, rear
Turn adjuster wheel counter-
clockwise as far as possible.
(One-up without load)
Turn adjuster wheel as far
as possible counterclock-
wise, then 10 turns clockwise.
(One-up with load)
Turn adjuster wheel clockwise
as far as possible. (Two-up
with load)
Remount toolkit.
Install seat (
49).
Damping
Adapting to road
condition
Damping must be adjusted to the
road conditions and the spring
preload.
A rough road surface requires
softer damping than a smooth
road surface.
An increase in spring preload
requires firmer damping, a re-
duction in spring preload re-
quires softer damping.
Adjusting damping on rear
wheel
Park motorcycle, ensuring that
support surface is firm and
level.
To increase damping, turn ad-
justment screw 1 clockwise.
5
55
z